Video - Jewelry Tools Basics

Here's a video about the basic tools for jewelry making from WigJig Jewelry Making Basics. This is a really great basic beginner video! Wish it had been around nine years ago!

Get everything on this video below:

Flush Cutters                                               Chain nose pliers
Round Nose pliers                                       Chasing hammer
Bent Chain Nose pliers                               Anvil
Nylon jaw pliers                                          Bench Block
Step Jaw pliers                                            Nylon hammer
Bent Closing pliers                                     Cup bur and pin vise

Remember to leave your own review, just join us and post!

Pat K.
The Jewelry Craft Shop
http://twitter.com/#!/JewelCraftShop

Video - Choosing and Using a Chasing Hammer

Here's something for beginners! A little video on how to choose and use a chasing hammer from Beaducation!






Remember to leave your own review, just join us and post!
Pat K.
The Jewelry Craft Shop
http://twitter.com/#!/JewelCraftShop

Using a Jewelers' Saw Video

This video is by Susan Lenart Kazmer, queen of cold connections! She's using an 8" saw frame because she works with large pieces of metal when creating some of her art. She also makes jewelry and that requires a smaller saw frame, around a 4" jewelers' saw is a general all-purpose size for smaller items.

She's a rather interesting artist, I really like her demos.
 
Jewelers Saw Blades
4" Jewelers' Saw Frame

Remember to leave your own review, just join us and post!
Pat K.
The Jewelry Craft Shop
http://twitter.com/#!/JewelCraftShop

Product Review - Beadsmith Thing-A-Ma-Jig

Thing a Ma Jig Deluxe

Review from Amazon.com 
July 5, 2010
By Humming bird
4 stars  ★★★★☆ 
Very Well Constructed,
I really like the way this one is constructed.It is made of Stainless Steel. The first Jig I had bought was plastic and the pegs kept falling out causing my wire to lose place and my designs to mess all up. With this Jig you get several different pegs and you get clear rubber tubes to put on the bottom of the Jig so that your pegs don't fall out while you are wrapping the wire. Also it comes with templates that you can put on the top and use those designs as well as a blank template. What I did though was make copies of the templates so that if they wore out I could just make more copies. There are several Jewelry design books out that have jig patterns that you could go by as well and make some really nice Jewelry. Plus it is only a fraction of the cost of the Wig Jig and the Delphi etc... The only difference between those is that they come in spirals and other shapes where as this comes only in a rectangle but as I stated earlier you can make some beautiful designs with this Jig.

Review from Amazon.com
April 14, 2010 
S. Reilly
5 stars ★★★★★
Great little piece!,
It's so much fun to use!! Great for keeping multiples of designs consistent. Just get it!

Get it HERE!


Remember to leave your own review, just join us and post!

Pat K.
The Jewelry Craft Shop
http://twitter.com/#!/JewelCraftShop

Product Review - Dremel 8000

    I received this from my husband for Christmas 2010. (And no, I didn't kill him, I REALLY wanted it! Badly!!) I've expanded into making filigree and metal jewelry and wanted a hand held rotary drill to make holes for cold connections. I also use it to polish and sand my metal pieces, and to shape and sand glass. I love this drill!

     Now the Dremels that you plug in may have a bit more power, but my work station "drifts" in my tiny apartment. Although I mainly use the dining room table, which is not near an outlet, there are times when I need to sit by the window for better light or at my assembly station in the next room. So portability is a must!

     It's also light weight. I was a bit concerned at first that it would be awkward to use because it seemed too big for my hands. But once I started using it, it was like it was made for me. I get a lot of control from the pencil/pen-like shape of it. It drills right though 18g brass like butter and at 20,000+ rpm it can take on heavier gauges with only slightly less speed. It's fantastic on removing burrs and polishing metal. Gives me a satin finish and I'm having a blast with it.

     The one-hour charger is definitely an advantage over the old 3-hour charge models. When I'm planning a day of drill work and the battery is lower than I'd like, I just pop the battery in the charger and have my breakfast and coffee. By the time I'm ready to start, so's my drill. Pretty cool!

     I've also bought a gang of attachments for it, above and beyond what it comes with. The nice thing is that there are plenty of Dremel attachments that don't cost a lot of money. Really important when you're on a budget!

     Oh, did I say it was a variable speed tool? That's a handy-dandy feature if there ever was one! It gives you the right speed for the job. There's no need to put pressure on it at all, which is more than I can say for hammers and pliers!

     My best advice is to read all the instructions first. A handheld rotary tool like this is not like the power drills used for heavier tasks. Get to know it and its capabilities (and limits), and I promise, you won't be disappointed!

    You can get this little honey right HERE!

Remember to leave your own review, just join us and post!
Pat K.
The Jewelry Craft Shop
http://twitter.com/#!/JewelCraftShop

Copper Metalworking Video Using Three Hammers

Here's a metalworking video on how to set the rim on a raised copper vessel. This cool technique uses three types of hammers a raising hammer, a planishing hammer and a ball peen chasing hammer!

Copper is such a great medium to work in, don't you think?

Remember to leave your own review, just join us and post!

Pat K.
The Jewelry Craft Shop

How Does a Dremel Tool Work? | eHow.com

I just love my handy-dandy Dremel tool. Here's a video to tell you more!

How Does a Dremel Tool Work? | eHow.com

Remember to leave your own review, just join us and post!
Pat K.
The Jewelry Craft Shop

Product Review: Solder Sucker

Solder Sucker

This review comes from www.luvdiy.com
Richard Kenyada says:

April 7, 2011 at 9:19 am
5 stars ★★★★★
Never Know When You’ll Need One,
I never thought I’d have a reason to use a de-soldering pump, but recently I found myself disassembling the power supply of an LCD TV. The TV manufacturer had placed inferior capacitors on the circuit board of the power supply and after 2 years, the TV would not turn on. After much research, I found that I could swap out the bad capacitors myself and save a ton of money. So I purchased the desoldering pump to help remove the old solder from the circuit board by vacuuming up the hot solder so that the capacitor can be replaced. Though I had no experience with circuit boards, I was able to complete the task successfully, and the TV now works like new. The desoldering pump worked perfectly, and I can honestly say, “This product sucks!”


Review from Amazon.com
By Alzadna "Father of three"

October 19, 2007
4 stars  ★★★★☆ 
Does the job,
This review is from: SOLDER SUCKER DESOLDERING PUMP DESOLDER REMOVAL VACUUM (Misc.)
It is nice for the price. Did what it is suppose to do. Doesn't feel heavy duty thought. Did not expect that at this price. Recommended for medium to light jobs.

Get Solder Sucker HERE!

Remember to leave your own review, just join us and post!

Pat K.
The Jewelry Craft Shop

Product Review: Dremel 220-01 Rotary Tool Work Station

Dremel 220-01 Rotary Tool Work Station

Review from Amazon.com
5-Stars ★★★★★ a handy accessory, February 17, 2011
By acktwice
Being very familiar with dremel products this purchase was a no brainer for me.I use this work station for scale modeling and it has saved me a lot of frustration with misaligned drill holes and part trimming. The price is reasonable and the quality of the tool is great. I reccomend this for the hobbyist.

Review from Amazon.com
4-Stars ★★★★☆  Love this Dremel drill press March 1, 2011
By Albert De Jesus
Althought the Dremel 4000 by itself is a handy tool to have, you can't go wrong having the "Dremel 220-01 Rotary Tool Work Station" it has performed well for all the reason I use it for. I gave it 4 stars because if there is any room for improvement, It would be the nut to attach the Dremel 4000 with. Its made of plastic. I hope Dremel get enough of these suggestions to one day make it out of metal.

Review from Amazon.com
3-Stars ★★★☆☆ dremel May 14, 2008
By gadgetjunki "gadgetjunki"
It does much of what I want it to do, problem is it is only good for very light work or as a holder for the dremel for some jobs. Many of the parts are plastic and it moves around when the product is in use, any preasure placed on the tool and it distorts from center. I have got good use out of it anyway but it wont take the place of a drill press. If it was made of all metal it would be a sweet tool with few flaws.

Buy the Dremel 220-01 HERE!

Remember to add your own reviews, join us and post!

Pat K.
The Jewelry Craft Shop

Welcome to the Jewelry Craft Shop Blog! - Be a Reviewer!

     Welcome! The Jewelry Craft Shop Blog is the place to find reviews of jewelry making and crafting supplies for just about every handmade craft available. Are you into beading, scrap booking, wire wrapping, metal fabricating, soap making, painting, candle making or sewing? Well, this is the place to find reviews on many of the supplies and tools you use everyday.

     Sometimes I'll feature an item that I have not personally purchased or used. That's when I'll depend on reviews from third party sources and that's where YOU come in! If you have used one of the products on this blog, join us and leave your own review! Let your fellow crafters know when something is a good product and warn us if it sucks!

     You can also purchase most of the items reviewed through a link on the entry. All items are sold securely by reputable sellers and shipped right to your door! Hundreds of items are available daily! And many of the best deals, rare items and best sellers are already hand picked for you by me, fellow crafter, Pat K.

     So stop by often, you are more than welcome! And remember, YOUR OPINION COUNTS!

     Keep on craftin'!  :-)

Pat K.